Posh Wash Auto Mobile Detailing

Your Paint Is Rougher Than It Looks

Posh Wash Auto's clay bar treatment pulls bonded dirt, brake dust, and industrial fallout straight out of your paint — restoring a glass-smooth finish on trucks, SUVs, and sedans across Tulsa.

Get a Free Quote Now

What's Included

The Process

1

Pre-Wash

We rinse and hand wash your vehicle first to strip off loose dirt and grit. Claying over a dirty surface damages the paint — so this step isn't optional.

2

Contamination Check

Brian runs a plastic bag test across your paint panels. What your eyes miss, your fingertips won't — rough patches reveal exactly where bonded contamination is hiding.

3

Clay Bar Decontamination

Working one panel at a time, we apply a clay lubricant and glide the clay bar in straight, overlapping passes. The clay grabs and lifts contaminants that washing alone can never remove.

4

Panel Wipe and Inspection

Each panel gets wiped clean with a fresh microfiber towel and re-checked with the fingertip test. We don't move on until it passes.

5

Protective Finish

Once the surface is fully decontaminated, we apply a spray sealant or quick detailer to seal the clean paint and give it immediate protection against the elements.

Is This Right For You?

Clay bar treatment is the right call if your paint feels gritty or rough after washing, or if you're prepping your vehicle for paint correction or a ceramic coating — skipping this step before either of those services is a mistake. It's also a solid annual maintenance move for any truck, SUV, or daily driver in the Tulsa area dealing with highway fallout, construction dust, and Oklahoma's unpredictable weather.

Common Questions About Clay Bar Treatment

A wash removes surface dirt — clay removes contamination that's bonded to the paint itself. Brake dust, industrial fallout, and road grime embed into your clear coat over time and can't be rinsed off. Clay physically pulls those particles out, which is why your paint feels dramatically smoother afterward.
Not when it's done correctly. We use proper clay lubricant throughout the entire process to keep the clay gliding without marring the surface. Using clay dry — or on a dirty car — is what causes scratches, which is why the pre-wash step matters.
Most vehicles take between 1.5 and 3 hours depending on size and how contaminated the paint is. A full-size truck or SUV typically takes longer than a sedan. We'll give you a time estimate when you get your free quote.
Yes — this is one of the most important prep steps before any coating goes down. Ceramic coatings bond directly to your paint, so if contaminants are still sitting on the surface, you're locking them in permanently. Clay bar decontamination is a required step in any proper coating prep process.
For most drivers in Tulsa, once a year is enough to stay on top of contamination buildup — especially if your vehicle sees highway miles, sits near construction zones, or spends time outside. If your paint regularly feels rough after washing, that's a sign it's time.

Areas We Serve

TulsaSouth TulsaMidtown TulsaJenksBixbyBroken ArrowOwassoSapulpa

Ready for Clay Bar Treatment?

Get a free, no-obligation quote. We come to you.

📞 Call 9189847666
Get a Free Quote Now

Get a Free Quote Now

Fill in a few details and we'll get back to you with a free, no-obligation quote.

Or call now: 9189847666